Welcome to our Government & Military Antennas Page!   

Below is a list of our government & military radio antenna products.   Just "click" any link, to be taken to a page with full information and photos of listed products, their available accessories and options.   Use your browser's back button to return to this page.   We are always adding products to our line, so check this page often for the latest updates.   EmComm Products LLC® reserves the right to change product specifications at anytime, without notice or obligation.

BB-2K-90G Broad-Band, Multi-Wire HF Antenna, 3-80 MHz to 2KW PEP. An extreme-duty, mil-spec antenna only 90 feet long and 3 feet wide; the BB-2K-90G antenna covers the HF spectrum from 3 to 30 MHz and low VHF from 30 to 80MHz! Also available in the larger BB-2K-175G model, covering 1.6 to 80 MHz, both are CCS rated at 1KW CW/2KW SSB. Designed especially for stations using ALE/Frequency Hopping modes and for installation in harsh climatic environments; these antennas are for fixed-station use and are built like a truck! They will take weather conditions that would destroy most other designs! Shipped fully assembled, the BB series antennas include everything required for installation except a mounting structure(s), 50 ohm coaxial feed-line w/N-Male connector and 3/8 to 1/4 inch support rope. All hardware is stainless-steel, wire elements are heavily insulated with mil-spec black PE insulation and are 13 AWG strained copper-clad steel. Spreaders are 1.5 inch OD fiberglass tubing with .125 inch walls and are reinforced with a .250 inch wall at all points where they are penetrated by the wire elements, and/or support ropes. All connections are strain-releived, using a unique combination of .125 inch OD double-braided black poly rope and machine swedged heavy-duty aluminum crimps!

BB-500-90G Broad-Band, Multi-Wire HF Antenna, 3-80 MHz to 1KW PEP. An extreme-duty, mil-spec antenna only 90 feet long and 3 feet wide; the BB-500-90G antenna covers the HF spectrum from 3 to 30 MHz and low VHF from 30 to 80MHz! Also available in the larger BB-500-175 model, covering 1.6 to 80 MHz, both are CCS rated at 500W CW/1KW SSB. Designed especially for stations using ALE/Frequency Hopping modes and for installation in harsh climatic environments; these antennas are for fixed-station use and are built like a truck! They will take weather conditions that would destroy most other designs! Shipped fully assembled, the BB series antennas include everything required for installation except a mounting structure(s), 50 ohm coaxial feed-line w/N-Male connector and 3/8 to 1/4 inch support rope. All hardware is stainless-steel, wire elements are heavily insulated with mil-spec black PE insulation and are 13 AWG strained copper-clad steel. Spreaders are 1.5 inch OD fiberglass tubing with .125 inch walls and are reinforced with a .250 inch wall at all points where they are penetrated by the wire elements, and/or support ropes. All connections are strain-releived, using a unique combination of .125 inch OD double-braided black poly rope and machine swedged heavy-duty aluminum crimps!

BB-2K-175G Broad-Band, Multi-Wire HF Antenna, 1.6-80 MHz to 2KW PEP. An extreme-duty, mil-spec antenna 175 feet long and 3 feet wide; the BB-2K-175G antenna covers the HF spectrum from 1.6 to 30 MHz and low VHF from 30 to 80MHz! Also available in the smaller BB-2K-90G model, covering 3 to 80 MHz, both are CCS rated at 1KW CW/2KW SSB. Designed especially for stations using ALE/Frequency Hopping modes and for installation in harsh climatic environments; these antennas are for fixed-station use and are built like a truck! They will take weather conditions that would destroy most other designs! Shipped fully assembled, the BB series antennas include everything required for installation except a mounting structure(s), 50 ohm coaxial feed-line w/N-Male connector and 3/8 to 1/4 inch support rope. All hardware is stainless-steel, wire elements are heavily insulated with mil-spec black PE insulation and are 13 AWG strained copper-clad steel. Spreaders are 1.5 inch OD fiberglass tubing with .125 inch walls and are reinforced with a .250 inch wall at all points where they are penetrated by the wire elements, and/or support ropes. All connections are strain-releived, using a unique combination of .125 inch OD double-braided black poly rope and machine swedged heavy-duty aluminum crimps!

BB-500-175G Broad-Band, Multi-Wire HF Antenna, 1.6-80 MHz to 1KW PEP. An extreme-duty, mil-spec antenna 175 feet long and 3 feet wide; the BB-500-175G antenna covers the HF spectrum from 1.6 to 30 MHz and low VHF from 30 to 80MHz! Also available in the smaller BB-500-90G model, covering 3 to 80 MHz, both are CCS rated at 500W CW/1KW SSB. Designed especially for stations using ALE/Frequency Hopping modes and for installation in harsh climatic environments; these antennas are for fixed-station use and are built like a truck! They will take weather conditions that would destroy most other designs! Shipped fully assembled, the BB series antennas include everything required for installation except a mounting structure(s), 50 ohm coaxial feed-line w/N-Male connector and 3/8 to 1/4 inch support rope. All hardware is stainless-steel, wire elements are heavily insulated with mil-spec black PE insulation and are 13 AWG strained copper-clad steel. Spreaders are 1.5 inch OD fiberglass tubing with .125 inch walls and are reinforced with a .250 inch wall at all points where they are penetrated by the wire elements, and/or support ropes. All connections are strain-releived, using a unique combination of .125 inch OD double-braided black poly rope and machine swedged heavy-duty aluminum crimps!

Niljon® U/VHF Multi-Polarized Antenna. An 18 inch high, patented antenna design covering 130-180, 200-225 and 430-480 MHz to 200 watts! An adaptation of this design is the basis of the U/VHF element of our RADS 9-11/G1®, RADS 9-11/G2® and RADS 9-11/G3® model - Rapid Antenna Deployment Systems®

RADS-Q® Rapid Antenna Deployment System® for Mobile EmComm - A mobile/portable emergency U/VHF 3 band quarter-wave antenna system covering 130 to 180, 220 to 225 and 430 to 480 MHz these antennas are designed specifically for the demands of Mobile EmComm use

RADS 9-11/G1® Rapid Antenna Deployment System® for Civil Government EmComm - A complete man-portable U/VHF combination, interoperability antenna system covering any customized combination of up to five separate U/VHF elements; allowing full interoperability on the 30-80 MHz low VHF band at up to 100 watts carrier, 130-180 MHz high VHF band, 220-225 MHz and 430-480 MHz UHF bands at up to 200 watts carrier, 700-1000 MHz at up to 100 watts carrier and 1-6 GHz at up to 10 watts carrier, in one, easy to deploy, portable package! This system is ideal for any sized agency; law enforcement, EMS, fire service, public utilities, etc., and will allow operation of multiple radios of different makes, power outputs and bands. It is ideally suited for multi-agency command posts, fire bases and as an emergency back up antenna system for EOCs and 911 centers.

RADS 9-11/G2® - The RADS 9-11/G2® is a complete, man-portable combination U/VHF and HF auto-tuning antenna system for military and government use. Incorporating a specially modified SGC®, SG-237® Smartuners®, this system can be built to cover not only the U/VHF combination of our RADS 9-11/G1® but also to cover any HF frequencies in the range of 3-30 MHz, PLUS 30-60 MHz low VHF. If your agency requires both U/VHF and HF coverage with auto-tuning on HF to 100 watts PEP, this is the system for you!

RADS 9-11/G3® - This is our "NO Tune" combo U/VHF (to 200 watts), and HF (at up to 150 watts) system for government and military operations. The HF elements not only support operations on all frequencies from 3 to 30 MHz HF but up to 80 MHz VHF as well! Easily deployed in any terrrain and in any weather, by one or two persons in under 10 minutes and all without tools! This system requires little space and is adaptable to any tactical requirement, climate or terrain. One antenna system for LOS U/VHF, NVIS HF, medium and long HF shots in a light-weight, easy to use, self-supporting package that is ideal for ALE/Frequency hopping modes!

RADS 9-11/G4® Rapid Antenna Deployment System® for Government & Military Applications. This is our fixed-station antenna system for military and government use from 2 to 80 MHz, featuring HF-NVIS coverage of the 2 to 12 MHz segment of the HF band, and both medium and long range coverage from 12 to 30 MHz. In addition, it also allows full LOS operations on the 30 to 80 MHz VHF range! Its built tough, for years of service in the worst of conditions and is usable with most present generation and legacy systems to 400W PEP. It is ideal for ALE/Frequency Hopping modes, with very high throughput.